YONGNUO YN560-TX II Manual Flash Trigger Remote Controller LCD Transmitter Compatible with Canon DSLR Camera to YN560III/YN560IV/YN660/YN968N/YN860Li Speedlite RF-602/RF603/RF603 II/RF605 Receiver


YONGNUO YN560-TX II Manual Flash Trigger Remote Controller LCD Transmitter Compatible with Canon DSLR Camera to YN560III/YN560IV/YN660/YN968N/YN860Li Speedlite RF-602/RF603/RF603 II/RF605 Receiver




Features
  • For Canon DSLR cameras. 16 channels, transmission range: 100 meters. M/Multi flash modes.
  • Support wireless trigger to YN560III/YN560IV/YN660/YN968N/YN860Li speedlite.
  • Support wireless shutter receiver of RF-602/RF603/RF603 II/RF605.
  • Remote control of flash output and zoom per group; up to 6 groups.
  • Grouping show supports paging and scrolling mode; Customizable maximum grouping.
  • YONGNUO YN560-TX II Manual Flash Trigger Remote Controller LCD Transmitter Compatible with Canon DSLR Camera to YN560III/YN560IV/YN660/YN968N/YN860Li Speedlite RF-602/RF603/RF603 II/RF605 Receiver





    Features
  • For Canon DSLR cameras. 16 channels, transmission range: 100 meters. M/Multi flash modes.
  • Support wireless trigger to YN560III/YN560IV/YN660/YN968N/YN860Li speedlite.
  • Support wireless shutter receiver of RF-602/RF603/RF603 II/RF605.
  • Remote control of flash output and zoom per group; up to 6 groups.
  • Grouping show supports paging and scrolling mode; Customizable maximum grouping.
  • Yongnuo Wireless Flash Speedlite YN560 III GN58 Built-in Trigger Receiver System Compatible with RF603 II YN560-TX II T7 77D 5DIV D5600





    Features
  • YN560 III Manual Flash, with Built-in 2.4G wireless Trigger system, can receive the signals sent by RF603 II and RF602 wireless receiver. It is compatible with Standard Hot shoe DSLR Cameras and Yongnuo RF603II RF602 YN560-TX II.
  • GN58 @ ISO100, 105mm, LCD Screen, Metal Hot Shoe, supporting 16 channels, zoom range: 24 28 35 50 70 80 105mm, 8 levels of output control (1/128 - 1/1), 29 levels of fine tuning.
  • Support 2.4G ultra-long-range wireless flash with the farthest triggering distance up to 100 meters, support Manual and Multi Mode.
  • A Variety of trigger synchronization, YN560 III can be triggered though the camera set-top, 2.4G Radio, S1 and S2.
  • Additional features: the electronic flash head zooming, sound prompt, automatically saving setting, power saving mode, overhearting protection and advanced options
  • Yongnuo YN560-TX YN-560 TX Manual Flash Transmitter Controller for YN-560 III RF602/RF603/RF-603 II for Nikon





    Features
  • Advanced model of YN560-TX [Lighter, Smaller, Easier to LOCK on the flashes(but not twist) than YN560-TX]
  • Can control up to 6 groups meaning that it can control up to 6 flash units.
  • Support Wireless Trigger For Yongnuo YN560IV / YN560III / YN660 / YN968N / YN860Li speedlite
  • Compatible with & Wireless Shutter Receiver of RF-602, RF-603, RF-603 II, RF605
  • CE/FCC/Telec certification, and Can work with any model of camera as long as it has standard hot shoe.
  • YONGNUO YN968N II Wireless TTL Flash Speedlite 1/8000s HSS Built-in LED Light 5600K Compatible with Nikon DSLR Cameras Compatible with YN622N YN560 Wireless System





    Features
  • Equipped with LED Light: Equipped with a high power LED light of high power, brightness can be adjusted, there is a built-in diffuser and a color conversion filter for the LED light.
  • Compatible with YN622N(master/slave) and YN560(slave) Wireless System: When YN968N is used as master unit, it can control and fire YN968N/YN622N(II)/YN685N being slave unit. When YN968N is set as YN622 (slave mode), it can received control signal or trigger signal from master unit YN968N/YN622N(II)/YN622N-TX, and achieves slave flash in TTL/M/Multi mode. When YN968N is set as YN560 (slave mode), it can receive control signal or trigger signal from YN560-TX (II)/RF603 (II)/RF605, and achieves fla
  • High Guide Number, Supports High-speed Sync: GN60@ISO100,200mm, supports high-speed sync TTL, manual flash, multi flash, Gr grouping flash, the highest synchronous speed can reach 1/8000s.
  • Supports USB Firmware Upgrade: The YN968N equipped with the USB interface, supports firmware upgrade, the users can download the upgrade firmware through the Yongnuo official website to upgrade the flash.
  • Newly Upgraded Electric Zoom and Supports Wireless Optical Slave function: supports auto and manual zooming, the flash coverage can be changed between AUTO, 20~200mm; supports receiving YONGNUO, Canon' s and Nikon' s wireless optical master signal, supports S1 and S2 flash mode.
  • Vktech Yongnuo YN560-TX Wireless Flash Controller for Canon 650D 550D / 560III





    Features
  • 6 Groups (meaning that it can control up to 6 flash units as ABCDEF)
  • 16 Channels ,2.4GHz 100M Range
  • Supports RF-603 /RF-603 II Wireless Shutter Release
  • It can work with any model of camera as long as it has standart hot shoe
  • Remote Manual Power Control ,Zoom Head Control ,Remote Multi (Stroboscopic) Setting
  • YONGNUO YN560-TX for Canon Flash Transmitter Provide Remote Manual Power Control for YN-560 III Manual Flash Units Having Manual RF-602 RF-603 RF-603 II Compatible Radio Receivers Built In LF466





    Yongnuo YN-560IV(560III upgrade version,a Combination of YN-560 III and YN560-TX all functions) 2.4G Wireless Flash Speedlite Trigger Controller for Canon Nikon Olympus Pentax





    Features
  • Supports Wireless Slave Function, fully supports YN560-TX, RF-603 II RF-602 Wireless Transmitter
  • YN560 IV=YN560III+YN560-TX, Supports Wireless Master Function, Supports Multiple Trigger Synchronous Mode
  • Supports setting save automatically, custom settings ( fn )
  • GN58@ISO100, 105mm ( M / MUlti mode )
  • Supports ultra-fast charging recycle system, External power supply
  • YONGNUO YN560-TX II LCD Flash Trigger Remote Controller for Nikon and YN560IV/III YN660 with Wake-up Function for Nikon Cameras





    Features
  • Advanced model of YN560-TX [Lighter, Smaller, Easier to LOCK on the flashes(but not twist) than YN560-TX].
  • Can control up to 6 groups meaning that it can control up to 6 flash units.
  • Support Wireless Trigger For Yongnuo YN560IV / YN560III / YN660 / YN968N / YN860Li speedlite.
  • Compatible with & Wireless Shutter Receiver of RF-602, RF-603, RF-603 II, RF605.
  • CE/FCC/Telec certification, and Can work with any model of camera as long as it has standard hot shoe.
  • YONGNUO YN560 IV Wireless Flash Speedlite + YN560-TX II C LCD Flash Trigger Remote Controller for Canon





    Features
  • YN560 IV=YN560III+YN560-TX(II). Supports Wireless Master Function and Wireless Slave Function, fully supports YN560-TX(I/II), RF-603(I/II) and RF-602 Wireless transmitter.
  • The YN560 IV can triggered through the set top of the camera, 2.4G wireless triggering, S1 and S2 pre flash cancel mode. Endure the battery is fully changed; Supports setting save automatically, custom settings ( fan ). Verify the flash light setting
  • Supports ultra-fast charging recycle system, external power supply. Check the remote control settings before use.
  • YN560TX II support Wireless Trigger For Yongnuo YN560IV / YN560III / YN660 / YN968N / YN860Li speedlite.
  • One YN560 IV can respectively receive the wireless signal from YN560 IV, YN560-TX(I/II), RF-603(I/II) and RF-602, with optional 16 channels; when the YN560 IV and YN560-TX(I/II) used as transmitter, it can realize remote control the parameter settings.